Page 1
Quick Start Guide 3500 AquaVent 5 More Info | Instructions | Get Quote Please read this document carefully before using the AquaVent 5. High Quality Groundwater and Surface Water Monitoring Instrumentation...
Page 2
MODBUS or SDI-12 protocols, see separate User Guides. Getting Started Wellhead 1. Download the software from: www.solinst.com/downloads and install Levelogger Software on your PC. 2. Install the Wellhead batteries. The Wellhead uses 4 user- replaceable 1.5V AA lithium batteries. 10-Pin (SP) 3.
Page 3
Ensure you are using the latest software and firmware versions for your AquaVent 5 logger and Wellhead. Visit www.solinst.com/downloads or use the update notifications in the software for help. Wellhead. Visit www.solinst.com/downloads or use the update notifications in the software for help.
Page 4
Click ‘OK’. Note: Note: The default directory for downloaded and saved data is: The default directory for downloaded and saved data is: <C:\Program Files\Solinst\Levelogger4_5\Data> <C:\Program Files\Solinst\Levelogger4_5\Data> Data is saved as an *.xle file. Data is saved as an *.xle file.
Page 5
AquaVent 5 Quick Start Guide AquaVent 5 Ranges AquaVent 5 Models are rated to a specific submergence depth Note The choice of model depends on the accuracy of the level required and the submergence depth. Most important, your selection should be The AquaVent 5 logger can withstand based on the maximum anticipated water level fluctuation.
Page 6
• Use a Solinst Water Level Meter to take a manual depth to water measurement that will be used to verify AquaVent 5 readings •...
Page 7
Software (see image on Page 1). • The App/DataGrabber Connector Cable allows you to connect to a Levelogger 5 App Interface for communication using the Solinst Levelogger App, or to a DataGrabber 5 for downloading data to a USB device.
Page 8
3. Make sure you are using the correct Wellhead Connector Cable to connect to the PC. • You must be using a USB Connector Cable connected to the 10-pin Solinst Protocol connection on the Wellhead. The cable and connection are colour-coded orange.
Need help?
Do you have a question about the AquaVent 5 3500 and is the answer not in the manual?
Questions and answers