Milwaukee M28 CHPX Original Instructions Manual page 13

TECHNICAL DATA
Cordless Rotary Hammer
Production code
Battery voltage
No-load speed
Rate of percussion under load max.
Impact energy per stroke according to EPTA-Procedure 05/2009
Drilling capacity in concrete
Drilling capacity in steel
Drilling capacity in wood
Core cutter in concrete, bricks and limestone
Chuck neck diameter
Weight according EPTA-Procedure 01/2003 (Li-lon 3,0 Ah)
Noise information
Measured values determined according to EN 60 745. Typically, the A-weighted noise levels of the tool are:
GB
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Hammer-drilling into concrete: Vibration emission value a
Uncertainty K =
Chiselling: Vibration emission value a
Uncertainty K =
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications,
with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury. Save all warnings and
instructions for future reference.
HAMMER SAFETY WARNINGS
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of
control can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a "live"
wire may make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
Additional Safety and Working Instructions:
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is re-
commended, such as dust mask, protective gloves, sturdy non-slip
footwear, helmet and ear defenders.
English
10
h,HD
h,Cheq
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Chips and splinters must not be removed while the machine is
running.
When working in walls ceiling, or floor, take care to avoid electric
cables and gas or waterpipes.
Remove the battery pack before starting any work on the machine.
BATTERIES
Do not store the battery pack together with metal objects (short
circuit risk).
Battery packs which have not been used for some time should be
recharged before use.
M28 CHPX
4480 01 01 ...
... 000001-999999
28 V
0 - 1350 min
-1
0 - 5000 min
-1
4,7 J
28 mm
13 mm
30 mm
75 mm
54 mm
4,7 kg
92,7 dB (A)
103,7 dB (A)
8,1 m/s
2
1,5 m/s
2
8,1 m/s
2
1,5 m/s
2