Radio Control; Operating Description; Operation Mode - Caple CE1000 Instruction Manual

Ceiling extractor hood
Table of Contents

Advertisement

WORKING
RC001
R
C
ADIO
ONTROL
Radio control used for the remote operation
of ducted cooker hoods.
TECHNICAL DATA
- Alkaline battery powered: 12 V mod. 23 A
- Operating frequency: 433.92 Mhz
- Combinations: 32.768
- Max. consumption: 25 mA
- Operating temperature: -20 ÷ + 55 °C
- Dimensions: 120 x 45 x 15 mm.

OPERATING DESCRIPTION

The transmitter is equipped with 5 buttons
for cooker hood management, as specified
below:
: Light ON/OFF command.
: Motor ON (speed level 1) / OFF command.
: Reduce speed.
: Increase speed.
: 10-minute timer.
The set suction speed is indicated by the LED
in the suction perimeter channel.
To each color generated by the LED, it
corresponds a specific speed, as shown
below: First speed WHITE
Second speed BLUE
Third speed DARK BLUE
Fourth speed RED
DIMMABLE LIGHTS FUNCTION
This function provides for lights dimmability,
ranging from 20% to 100% , by continuously
pressing the light key on the remote control.
Functions are the following:
- Hood light off - Press the light key - on at
100%.
- Light on at 100% - Press the light key - off.
- Light on at 100% - Continuously press the
light key - Brightness reduction.
- Releasing the key during reduction or
increase, the light keeps the luminous
intensity reached.
- Light on dimmed - Continuously press the
light key - Brightness is inverted if compared
to the previous function.
INITIAL OPERATING CONDITION
The manufacturer supplies the radio control
unit ready to be used with codes preset in the
Factory.

OPERATION MODE

Standard configuration:
Standard
configuration
"cooker hoods – radio control - system" to
be provided with the same transmission
code. In the event two cooker hoods radio
control system are installed in the same
room or nearby, each system may affect the
operation of the another. Therefore, the
code of one radio control system must be
changed.
Generating a new transmission code:
The radio control system is provided with
preset
codes.
required,
proceed
simultaneously buttons:
7
requires
Should
new
codes
as
follows:
all
be
Press

Advertisement

Table of Contents
loading

Table of Contents