Isuzu 3CH1-NGZG01 Introduction Manual page 73

TNV_OperationManual_T4(under 19kW).book Page 67 Wednesday, June 17, 2015 11:23 AM
The engine oil on a new engine becomes
contaminated from the initial break-in of internal
parts. It is very important that the initial oil change
is performed as scheduled.
Note: The oil drain plug may be in another location
if an optional oil pan is used.
Drain the engine oil as follows:
1. Make sure the engine is level.
2. Start the engine and bring it up to operating
temperature.
3. Stop the engine.
4. Remove one of the oil filler caps (Figure 1, (1))
to vent the engine crankcase and allow the
engine oil to drain more easily.
5. Position a container under the engine to collect
waste oil.
PERIODIC MAINTENANCE
1
K0000587D
1
1
045048-00X01
Figure 1
1
67