Mistral M1831-0 Operating Instructions Manual page 4

Enlarged version

Getting to know your

Ceiling Fan

Congratulations on the purchase of your new Ceiling

Fan by Mistral.

Before first using your new Ceiling Fan, it is most

important that you read and follow the instructions

in this use and care booklet, even if you feel you are

familiar with this type of appliance.

Your attention is drawn particularly to the section

dealing with IMPORTANT SAFEGUARDS. Find a safe

and convenient place to keep this booklet handy for

future reference.

This appliance has been designed to operate from a

standard domestic power outlet. It is not intended

for industrial or commercial use.

Installation of your

Ceiling Fan

Note: All ceiling fans must be installed by

a Qualified electrical contractor

Hangsure Installation

Note: The bracket must be able to support

at least the hanging weight of the fan (15kg).

To ensure earthing continuity, the downrod

securing screw must be firmly tightened on the

lower canopy.

1. Fix the bracket (supplied) to the ceiling joist

by means of two coach screws (not supplied)

or similar.

��

2. Hang the ball joint and Ceiling Fan onto the

bracket, making sure the guide pin of the bracket

fits into the slot of the ball joint and all wires

from the downrod are clear of the ball joint.

On cathedral ceilings, the slot is to point in the

direction of the incline.

��

Table of Contents