Important Safeguards • Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock, fire or could damage When using electrical appliances, in the unit. order to reduce the risk of fire, electric •...
Page 3
Features of Your Misting Fan Blade Assembly (inside) Safety Grille Fan& Mist Fan Switch Pillar Water Tank Cover Water Tank Castor Wheel...
Page 4
Your 75cm Commercial Mist Fan Congratulations on the purchase of your new Commercial Mist Fan. Before first using your Commercial Mist Fan it is most important that you read and follow the instructions in this use and care booklet, even if you feel you are quite familiar with this type of appliance. Your attention is drawn particularly to the section dealing with IMPORTANT SAFEGUARDS.
Page 5
Tips: Step 3: Mounting fan motor assembly Because the mist fan is heavy, so when Unscrew the 3 screws on the motor support collar assembling, it may require additional people to and position the fan motor assembly onto the assist. post protruding from the switch control box and Carefully remove the Mist fan &...
Step 6: Fitting misting plate to front safety grille. Unscrew and remove the 4 retaining screws from the mist plate assembly. Position the mist plate onto the front safety grille and secure it to the safety grille with 4 screws and tighten.
Fan height adjustable Unscrew A and then extend draw tube to adjust the height of mist fan. Adjustable Mist amount Increase or decrease the amount of mist by turning the mist adjusting dial until desired intensity is reached. Care and Cleaning Oscillation Setting To clean: Disconnect the power cord from the mains.
This warranty is given by GSM Retail Group ABN: 53007682475 For Warranty and technical queries 1300 941 901 Warranty Exclusions Damage to the appliance or any part through accident, misuse or negligence. Cat. No. MDB-30F09 July 2021...