Agilent Technologies 6811B User Manual page 43

Press this key to access the phase menu list.
Shift Phase
Display
PHASE <value>
PHASE:T <value>
PHASE:M <char>
Press this key to access the shape menu list.
Shape
Display
SHAPE <char>
SHAPE:T <char>
SHAPE:M <char>
CLIP <value>
Press this key to access the pulse menu list.
Pulse
Display
WIDTH <value>
COUNT <value>
DCYCLE <value>
PER <value>
HOLD <char>
Press this key to access the output menu list.
Shift Output
Display
OUTP:COUP <char>
*RST
TTLT:SOUR <char>
TTLT:STATE <value>
IMP:STATE <value>
IMP:REAL <value>
IMP:REAC <value>
PON:STATE <char>
RI <char>
DFI <char>
DFI:SOUR <char>
Notes:
value = a numeric value
char = a character string parameter
p
and
¯
and
Command Function
Set immediate output phase
Set triggered output phase
Select the phase mode (FIXED, STEP, PULSE or LIST)
Command Function
Select the immediate output wave shape (SINE,
SQUARE, or CSINE) CSIN = clipped sine wave
Select the triggered output wave shape (SINE, SQUARE,
or CSINE) CSIN = clipped sine wave
Select the shape mode (FIXED, STEP, PULSE or LIST)
Set the clipping level of the CSIN wave shape. This
specifies the point where clipping starts as a percentage of
the peak amplitude or percentage of THD.
Command Function
Set the pulse width
Set the number of output pulses
Set the pulse duty cycle as a percentage of the pulse period
Set the pulse period
Set the parameter that will be held constant as the other
parameters change (WIDTH or DCYCLE)
Command Function
Select output coupling (AC or DC)
Execute *RST command to place the ac source in the
factory-default state
Select Trigger Out source coupling (BOT, EOT or LIST)
BOT = beginning of trensient
EOT = end of transient
LIST = TTLT trigger (see Programming Guide)
Set Trigger Out state (ON or OFF)
Set output impedance programming (ON or OFF)
Set real part of output impedance
Set reactive part of output impedance
Select power-on state command (RST or RCL0)
Sets remote inhibit mode (LATCHING, LIVE, or OFF)
Sets discrete fault indicator state (ON or OFF)
Select the DFI source (QUES, OPER, ESB, RQS, or OFF)
Chapter
(see
q
scroll through the command list.
°
scroll through the parameter list.
Front Panel Operation - 4
4 of Programming Guide)
43