Operations 14 - EcoxGear EcoBoulder User Manual

Operations
Power On/Off
Power On: in power off mode, press
the EcoBoulder. "Power On, Ready to Connect" verbal
response will be heard.
Power Off: Press
Pairing a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on EcoBoulder. "Power on, ready to connect" verbal
response will be heard.
3. Press
Bluetooth icon
4. Navigate to your Bluetooth device's setup screen, find
ECOXGEAR and connect.
5. If the connection is successful, the Bluetooth icon
lit solid and "Connection successful" verbal response will be
heard.
Notes:
If the pairing is not complete within
quit the pairing mode. You need to repeat the steps of pairing
again.
After the connection is successful, if you turn the speaker off
and turn it on again, it will be connected to the last connected
device automatically. Also, a verbal response "Power on, ready
to connect" followed by "Connection successful" will be heard.
Delete the Paired device
Press and hold
briefly to power off the EcoBoulder.
briefly to start pairing to your device. The
will start flashing.
for 5 seconds to delete the paired device.
5 minutes, the speaker will
14
briefly to power on
will