XPLORE TECHNOLOGIES ix104c4 User Handbook Manual page 120

Appendix F. Configuring Dual Mode Tablet Digitizer Input Methods
Using the Panel Control Center to configure temporary changes to the input method
120
From the drop-down list, select
5.
.
Panel Toggle
Value
Digitizer Selection
Touch Panel Toggle If the digitizer input method is set to Auto or Touch
Click .
6. Close
Digitizer Selection
Description
If the digitizer input method is set to Auto in the
BIOS Setup Utility, toggles from Auto to Digitizer
Only to Touch Only.
Only in the BIOS Setup Utility, temporarily disables
touch only.
or
Touch
iX104C 4 User's Handbook