Selecting The Digitizer Input Method - XPLORE TECHNOLOGIES ix104c4 User Handbook Manual

iX104C 4 User's Handbook
Appendix F. Configuring Dual Mode Tablet Digitizer Input Methods
Using the BIOS Setup Utility to set input method defaults

Selecting the digitizer input method

Select the Startup Configuration tab.
1.
Digitizer Selection
field
In the
2. Digitizer Selection
drop-down list as follows:
Value
Auto
Touch Only
Digitizer Only
field, select the value from the
Description
Enables automatic sensing (Auto Sense) of inputs
from touch and from the active pen.
Note: This is the default setting.
Enables touch input only. Active digitizer, pen
inputs, and Auto Sense are all disabled.
Enables inputs from the active pen only. Touch
input and Auto Sense are disabled.
117