Calibrating The Digitizer: Ix104C4 Dual Mode - Windows Vista - XPLORE TECHNOLOGIES ix104c4 User Handbook Manual

See "Selecting Auto-Sense,
Active, or Touch mode" on
page 38.
iX104C 4 User's Handbook
Calibrating the digitizer: iX104C
Windows Vista
Follow these instructions if your computer is running Windows Vista.
In Active mode, you can use only the stylus included with the
computer as the pointing device.
In Touch mode, you can use the stylus, a similar pointing device, or
your finger.
Follow the instructions in the sections below to calibrate the digitizer
for each mode.
Calibrating the digitizer: Active mode
From the menu, select
1. Start
The Control Panel opens.
Double-click the
2.
Chapter 3. Maintaining the Tablet
4
Control Panel
Tablet PC Settings
icon
icon.
Tablet PC Settings
Calibrating the digitizer
Dual Mode –
.
93