Windsor Clipper Duo Operating Instructions Manual page 19

Operations
Lower machine to floor.
Select continuous AUTO setting to start solution spray
or select intermittent PRESS setting to enable use of
trigger switches to start solution spray.
The intermittent PRESS setting requires the operator
to hold any one of the three trigger switches in the "on"
position with the fingers, and is typically used in small
MAIN SWITCH
areas where short cleaning passes are made.
The continuous AUTO setting allows the operator to set
the switch in the "on" position with one touch, and is
typically used in large areas where long cleaning
passes are made.
Place main switch in machine cleaning mode to start
cleaning process.
86408790 Operator's Manual - Clipper Duo 19