Fujitsu D2532 Technical Manual page 24

Calling the SAS/IME configuration program
You will find more information about IME in the following manuals:
– LSI Logic MegaRAID, SAS Software - User's Guide
– LSI Logic MegaRAID, SAS Device Driver - Installation
– Integrated SAS for RAID - User's Guide
– Global Array Manager, Client Software - User's Guide
Ê Start the PC, if the following message appears, press the key combination
[CTRL] and [C]:
„Press Ctrl-C to start LSI Logic Configuration Utility"
Following hint appears next:
„Please wait, invoking LSI Logic Configuration Utility..."
In the first menu all available SAS controllers are displayed.
 LSI Logic MPT Setup Utility
 Adapter List Global Properties
 ____________________________________________________________________________

 Adapter
PCI PCI PCI PCI

Bus Dev FNC Slot
 SAS1068
02 08



 ____________________________________________________________________________
 Esc = Exit Menu
 Alt+M = Global Properties +/- = Alter Boot Order Ins/Del = Alter Boot List
Terminating the SAS/IME configuration program
Depending on the current menu level, you can display the previous menu by
pressing the [ESC] key. If you have made changes in the current menu you will
be prompted to store them.
Ê To quit the configuration program press the [ESC] key until a corresponding
message is displayed.
24
FW Revision
00 00 1.10.01.00-IR
F1/Shift+1 = Help
SAS/IME configuration program
Status Boot
Order
Enabled 0
D2532 (RX100 S4)












