FANATEC CSL Elite Pedals Manual page 26

IMPORTANT:
than the CSL Elite Pedals single pedal units, also not the loadcell brake
unit!
5.9.4 Brake
This port is used for the connection to the loadcell brake pedal unit of the CSL
Elite Pedals Loadcell Kit.
IMPORTANT:
than the loadcell pedal unit from CSL Elite Pedals Loadcell Kit!
5.9.5 Clutch
This port is used for the connection to the clutch pedal unit of the CSL Elite
Pedals which is the original brake pedal unit from basic CSL Elite Pedals.
NOTE:
unit if you do not use a clutch at all. This allows you to use a similar flex-
ible mechanical setup like with CSL Elite Pedals but with using the load-
cell brake pedal unit from the CSL Elite Pedals Loadcell kit.
IMPORTANT:
than the CSL Elite Pedals single pedal units, also not the loadcell brake
unit!
5.9.6 Handbrake
This port is used for connection of the ClubSport Handbrake. Cable needed
to connect CSL Elite Pedals LC with ClubSport Handbrake is not included in
the CSL Elite Pedals Loadcell Kit package but is included in the ClubSport
Handbrake package.
IMPORTANT:
with the CSL Elite Pedals, CSL Elite Pedals Loadcell Kit and/or with the
Wheel Bases! Wheel Bases and ClubSport Handbrake are not included
and sold separately!
26
Do not try to use this port to connect any other device
Do not try to use this port to connect any other device
This port does not need to be connected to the clutch pedal
Do not try to use this port to connect any other device
Use only the connection cables which are packaged