Datalogic CBX800 Installation Manual page 31

Power
6
1
DS6300
Serial (Host)

CBX800 Source Interface

CBX800 Full Speed ID-NET™ Interface

Reader ID-NET™ Interface

External Trigger (for On-Line Mode)
Layout
CBX800
Parameters
sw package 003 and later
Net Type Rotary Switch
Address Rotary Switches
Topology Role
System Layout / Network
Baud Rate (bps)
System Layout / Host Port
Type
Communication Settings /
Data Source Serial Port / Data
Destination: ID-NET
Communication Settings /
Data Source Serial Port /
Expected Termination String
Communication Settings /
Data Source Serial Port / Line
Parameters/ (all parameters)
For 6/8K family scanners having software version 6.80 or later, an alternative fixed speed
(57600 baud) ID-NET™ layout can be made without the use of CBX800. See the ID-NET™
Application Note on CD-ROM for details.
For maximum ID-NET™ network performance use CBX800.
NOTE
ID-NET™ Slave Nodes
CBX800
2
5
Matrix 410™
4



ID-NET™ Gateway
ID-Net Gateway
9
X100 = 0..9 (ID-Net Baud rate)
X10 = 0..3
X1 = 0..9
ID-NET Slave (Multidata)
Aligned to the ID-Net Master
baud rate
Serial
<checked>
Aligned to the Data Source
device configuration
Aligned to the Data Source
device configuration
CBX800 INSTALLATION MANUAL
CBX100
3
7
ID-NET™
Host 2
SC4000
Host 1
ID-NET™
Master
Ethernet TCP/IP (WebSentinel)
Host Aux for CBX800 Configuration
Source Aux for Source Reader Configuration
Reader Auxiliary Interface for Reader Configuration
Note
(X10 + X1) Address Range =
1..31
See par. Baudrate Selection
if Communication Settings /Data
Source Serial Port / Send Data On
= Termination String
CBX100
3
7
DS4800
31