Water And Ice Dispenser - Bosch KAN56 Operating And Installation Instructions

en

Water and ice dispenser

Fault
Despite prolonged operating p p g p
time, ice cubes are not being ti i b t b i
dispensed.
Ice cubes are in the ice cube
container but are not being
dispensed.
Ice cubes are jammed in the
outlet of the ice cube container
or in the ice crusher.
Ice cubes are watery.
Ice cubes are evaporating.
The flap on the ice cube
dispenser is not closing properly.
Ice cubes are sticking in the ice
cube tray.
Ice cubes are not the same size
and there is water in the ice cube
container
Water dispenser is not p
f functioning. ti i
13
Possible cause
Tap turned off.
g
Water supply is interrupted. Wa
ter pressure too low.
Ice maker is locked. The symbol is
lit on the display panel.
Freezer compartment too warm.
Ice cubes are frozen together.
Ice cubes have melted power
failure or the freezer compartment
door was not closed properly.
Ice cubes are preventing the flap
from closing.
Limescale from the water may be
forming in the trays.
The appliance is not level.
Tap turned off.
Water supply is interrupted.
Water pressure too low.
Freezer compartment too warm.
Remedial action
Turn tap on.
Inform plumber.
Press the Ice maker" lock button.
Lower temperature in the freezer compartment
(see Setting the temperature").
Remove and empty the ice cube container.
Remove the ice cube container and rotate the screw
conveyor by hand. Loosen any jammed chunks of
ice with a wooden chopstick.
Remove the ice cube maker, empty and rub dry.
Cold air flowing over the ice cubes is causing shrink
age, particularly if consumption is low This is normal.
Remove ice cubes.
Moisten a cloth with vinegar and wipe out the trays.
If limescale is thick, always clean the trays when
cleaning the refrigerator compartment.
Align the appliance with a spirit level and with the
height adjustable rollers or feet (see Installation
instructions).
Turn tap on.
Inform plumber.
Lower temperature in the freezer compartment
(see Setting the temperature").