Configuring Function Keys As Speed Dials; Configuring Speed Dials Using The Web Interface; Figure 3-8: Web Interface - Function Keys - AudioCodes 420HD Administrator's Manual

Administrator's Manual
3.2.3

Configuring Function Keys as Speed Dials

This section shows how to configure function keys as speed dials using the Web interface
or the Configuration File.
On the 440HD and 430HD phones, the Function Keys are located adjacent to the BLF LCD
on the right of the phone's physical interface (covered on the 430HD). In the Web interface
they're labeled 1-12 and in the Configuration File 0-17.
On the 420HD, the Function Keys are the dial pad keys labeled 1-9. Long-pressing a dial
pad key activates its Speed Dial. In the Web interface, they're labeled 1-9 and in the
Configuration File 0-8.
You can configure Function Keys as Speed Dials (all three phone models) or as Speed
Dials + BLFs (Presence) (440HD phone only). You can use the Web interface or
Configuration File to do it.
3.2.3.1

Configuring Speed Dials using the Web Interface


To configure a Function Key using the Web interface:
1. Open the Function Keys page (Configuration tab > Personal Settings menu >
Function Keys).
Note: The figure above shows the 430HD/440HD phone's Function Keys screen.
The 420HD phone's Function Keys screen is identical, except that 1-9 keys are
supported (not 1-12 as in the 430HD/440HD phone's screen).
2. In the 'Number' field corresponding to the 'Key' column, enter the telephone
number to which to assign a Speed Dial.
3. Enter a 'Label' (applies only to the 440HD phone).
4. Click Submit.
Version 2.0.9

Figure 3-8: Web Interface - Function Keys

37
3. Manual Configuration of a Single IP Phone
400HD Series IP Phone with Microsoft Lync