Chapter 1 Before Starting Up - Planet GRT-101 Quick Installation Manual

Chapter 1 Before Starting Up

Before proceeding any further, please make sure correct Ethernet cable is used
for connecting the LAN port of your computer to GRT-101/401/402. The LAN LNK
indicator on the front panel will light up if a correct cable is used.
By default, the GRT-101/401/402 is shipped with its DHCP Server function enabled.
This means the client computers on the LAN network including the Administrator
PC can set their TCP/IP settings to automatically obtain an IP address from the
GRT-101/401/402.
■ Start your web browser and type http://192.168.0.1 in the browser's address
box, and wait for the login screen appears. The default user name and pass-
word are "root". Click OK button and you will login the management of
GRT-101/401/402.
The factory default management IP and subnet mask of GRT-
101/401/402 is 192.168.0.1 and 255.255.255.0 respectively. And
the default user name and password are "root".
Note
This quick installation guide is intended to help to install the G.SHDSL Bridge
Router to the network through the management interface. For more detailed
settings, please also refer to the user's manual.
3