Planet GRT-101 Quick Installation Manual page 12

15. Enter WAN1 IP: 10.1.2.1
16. Enter WAN1 Subnet Mask: 255.255.255.0
17. Enter Default Route Gateway: 10.1.2.2
18. Enter DNS Server: 168.95.1.1 and 168.95.192.1
19. The screen will prompt the new configured parameters. Check the parame-
ters and click
to configure other parameters.
Console Configuration
Do the following steps:
1. User: admin  password: admin 
2. enable  supervisor password: root 
3. setup  mode  Route 
4. wan  Interface number (1~8) : 1 
protocol  IPoA 
address  10.1.2.1 
255.255.255.0 
vpi_vci: 0 
32 
encap  LLC 
5. lan  Interface number: 1 
6. address  192.168.0.1 
255.255.255.0 
attrib  virtual 
12
. The router will reboot with the new setting or click