Fiat 124 SPIDER ABARTH 2017 User Manual page 51

Odometer/Trip Computer
The display mode can be changed from
odometer to "Trip computer A" to "Trip
computer B" and then back to odometer
by pushing the selector while one of
them is displayed.
The selected mode will be displayed.
05020102-121-001AB
Odometer/Trip Reset Button
1 — Odometer/Trip Reset Button
When the ignition is placed in the ACC
or OFF position, the odometer or trip
cannot be displayed. Pushing the
selector can switch the trip or reset it
for a ten-minute period in the following
cases:
After the ignition is cycled to OFF
from ON.
After the driver's door is opened.
Trip Computer
The trip computer can record the total
distance of two trips. One is recorded in
"Trip A", and the other is recorded in
"Trip B".
For instance, "Trip A" can record the
distance from the point of origin, and
"Trip B" can record the distance from
where the fuel tank is filled.
Use this meter to measure trip
distances and to compute fuel
consumption.
If the fuel economy data is reset using
the fuel economy monitor or Trip "A" is
reset using the trip meter, the fuel
economy data and Trip "A" are reset
simultaneously when the fuel economy
monitor with the trip meter is on.
Note:
Only the trip records tenths of miles
(kilometers).
Trip Computer Reset
The trip computer will be erased when
the power supply is interrupted (blown
fuse or the battery is disconnected) or
when the vehicle is driven over
9999.9 miles.
Instrument Panel
Illumination
Brightness Adjustment
The brightness of the instrument panel
and dashboard illuminations can be
adjusted by rotating the knob:
The brightness decreases by rotating
the knob to the left. A beep sound will
be heard when the knob has been
rotated to the maximum dim position.
The brightness increases by rotating
the knob to the right.
05020102-121-001AB
Dimmer Knob
1 — Instrument Cluster Illumination
Dimmer Knob
49