Power Windows - Fiat 124 SPIDER ABARTH 2017 User Manual

Table of Contents

Advertisement

Controls
1 – Temperature Control Knob: Turn it
clockwise for hotter temperatures and
counterclockwise for colder temperatures.
2 – Blower Control Knob: The fan has
seven speeds. Turn the knob clockwise
to increase blower speed or
counterclockwise to decrease blower
speed/enter Auto Mode. AUTO
position: The blower speed is
automatically controlled by the system
based upon the set temperature.
0 Position: To turn off the system, set
the dial to 0 position.
3 – Mode Selector Knob: Turn the
Mode Selector Knob to select air flow
mode. AUTO position: the air flow
automatically adjusts based upon the
selected temperature. Except AUTO
position: the desired air flow position
can be selected by turning the knob.
4 – Rear Window Defrost Button:
Push the button to turn on the Rear
Window Defroster. The Rear Window
Defroster operates for about 15 minutes
and then turns off automatically.
5 – Recirculation Button: Push the
button to select between outside air
and recirculated air positions.
6 – A/C Button: The air conditioning
(cooling/dehumidifying functions) can
be turned on or off by pushing the
button while the Blower Control Knob is
in a position other than 0.
34

POWER WINDOWS

Power Window Controls
The ignition must be placed in the ON
position for the power windows to
operate.
If the power window does not
open/close, wait a moment and then
operate the switch again.
Passenger Control Switches
The passenger window can also be
operated using the master control
switches on the driver's door.
Power Window Switches
1 — Driver's Window
2 — Passenger's Window
Power Window Switch Function
1 — Closing-Lightly Pull The Switch Up
2 — Opening-Lightly Hold The Switch
Down
Auto-Opening Power Windows
To fully open the window automatically
push the switch completely down. To
stop the window partway pull or push
the switch in the opposite direction and
then release it. The power window
cannot be fully closed while the door is
04070103-LN2-002
open.
Power Window System Initialization
Procedure
If the battery was disconnected during
vehicle maintenance, or for other
reasons (such as a switch continues to
be operated after the window is
open/closed), the window will not fully
open automatically.
04070103-L12-001

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents