Fiat 124 SPIDER ABARTH 2017 User Manual page 230

To accept it, select the checkbox. If the
desired name does not show up, the
names that match the string appear in a
list after entering a couple of characters
(to open the list of results before it
appears automatically, select the
"Receivable Audio Stations" button and
select the town from the list).
4. Enter the street name: select <Street
Name> and start entering the name of
the town on the keyboard. Find the
street you need: the most likely street
name is always shown in the input field.
To accept it, select the checkbox. If the
desired name does not show up, the
names that match the string appear in a
list after entering a couple of characters
(to open the list of results before it
appears automatically, select the
"Receivable Audio Stations" button and
select the street from the list).
5. Enter the house number: select
House Number then enter the house
number on the keyboard (to enter
letters, select QWE). Select the
checkbox to finish entering the address.
(If the entered house number cannot be
found, the midpoint of the street is
selected as the destination.
6. The selected location is shown on
the map. Navigation starts if Start is
selected, or after 10 seconds of no user
228
interaction. By touching the location
displayed on the screen, you can verify
the route. Additionally, the route can be
revised by selecting other options.
Selecting The Destination From The
POI (Point Of Interest)
If the name for a POI (Point Of Interest)
is input, a search candidate list is
displayed.
Proceed as follows:
1. Select the "Add A Destination"
button after selecting the "Open/Close
Menu" button on the MAP screen.
2. Select Find Places.
3. Select Filter by Name.
4. Using the keyboard, enter the name
of the POI (Point Of Interest). After
entering a few letters, select to open
the list of POI with names containing
the entered character sequence.
5. The selected location is shown on
the map. The system transitions to the
next screen by selecting Navigate To, or
it returns to the previous screen by
selecting the < button.
Note:
By touching the location displayed on
the screen, you can change the
destination to anywhere on the map.
Selecting The Destination From
Your Favorites
Proceed as follows:
1. Select the "Add A Destination"
button after selecting the "Open/Close
Menu" button on the MAP screen.
2. In the Navigation menu, select
Favorites. When Favorites is selected,
the screen transfers to the Favorites
screen. Select your registered favorite.
3. The selected location is shown on
the map. The system transitions to the
next screen by selecting Navigate To, or
it returns to the previous screen by
selecting the < button. By touching the
location displayed on the screen, you
can change the destination to anywhere
on the map.
4. Navigation starts if Start is selected,
or after 10 seconds of no user
interaction. By touching the location
displayed on the screen, you can verify
the route. Additionally, the route can be
revised by selecting other options.
Modifying The Route
Proceed as follows:
1. Select "New Route" to plan a new
route to the newly selected location.
The previous destination and
waypoint(s) are deleted.