Fiat 124 SPIDER ABARTH 2017 User Manual page 228

Receiving An Incoming Call
When an incoming call is received, the
incoming call notification screen is
displayed. The "Incoming Call
Notifications" setting must be on.
To accept the call: Push the steering
wheel button on the audio control
switch, or select Answer on the screen.
To reject the call: Push the hang-up
button on the audio control switch, or
select Ignore on the screen.
Navigation — If Equipped
SD Card — If Equipped
To use the navigation system, the SD
card containing the map information
needs to be inserted in the SD card slot.
When inserting the SD card, never
move the slider on the side of the SD
card to the LOCK position. If the slider
is set to LOCK, the SD card cannot be
read and the navigation system will not
operate.
This SD card is valid for use in only one
vehicle. Never use it in another vehicle.
If the SD card is used first in one vehicle
and then in another, the navigation
system for either one of the vehicles
may become inoperable.
226
Navigation Menu
Select and open the navigation menu.
You have the following options :
Navigation Screen
/ Open / Close. Opens and
closes the UMP (menu bar). The UMP
(menu bar) is displayed on the lower
part of the screen.
Adds a destination. Select your
destination by entering an address,
selecting a POI (Point Of Interest),
selecting a location on the map, or
selecting one of your Favorite
destinations. You can also look up your
recent destinations from the Smart
History by entering the coordinates.
If an internet connection is available,
Local Search can be of further help to
find your destination.
Displays the screen where traffic
information and the GPS reception
conditions can be set and verified.
Cancels waypoint/route.
Finds Places nearby. You can
search for Points Of Interest (POI) near
the vehicle position.
Displays the route parameters
and the route in its full length on the
map. You can also perform
route-related actions such as editing or
cancelling your route, picking route
11000001-121-112
alternatives, avoiding parts of the route,
simulating navigation or adding the
destination to your Favorites.
2D / 3D Change View Mode.
The map view mode can be changed
(2D north up/2D heading up/3D).
Switches to the Settings screen
where you change navigation settings.
Note:
Some functions are not available
depending on some countries and
regions.