Table of Contents
Advertisement
PROFESSIONAL AUDIO MIXER
Rear Panel
Rear Panel
1
10
1. POWER SWITCH
The power switch is used to turn ON/OFF the AC main power.
NOTE: Please make sure the amplifier's main volume is at the minimum position before switching
power on or off to avoid loud pops through the sound system loudspeakers.
2. MONITOR OUTPUT
These are unbalanced phone jacks used to connect monitor speakers.
Nominal output level is 0dBu, and approximately input impedance is about 2kΩ.
3. STEREO LINE INPUTS
This TRS balanced stereo inputs are designed for attaching line level devices up to +10dBu.
When you connect unbalanced signal to this input, make sure to link "Ring" and "sleeve" of your jack plug.
4. 48V PHANTOM POWER
This switch provides +48V phantom power to XLR input.
NOTE: DO NOT use unbalanced sources with the phantom power switched on. The voltage on pins 2&3 of
the XLR connector may cauce serious damage. Please minimize the fader before pressing this switch to
avoid speaker's damage.
8
MX-1646
2
3
9
8
4
5
7
6
Advertisement
Table of Contents
