Up-To-Frequency Sensitivity (Pr. 41); Output Frequency Detection (Pr. 42, Pr. 43, Pr. 50, Pr. 116) - Mitsubishi FR-A500 Series Instruction Manual

4.2.18 Up-to-frequency sensitivity (Pr. 41)

Pr. 41 "up-to-frequency sensitivity"
The ON range of the up-to-frequency signal (SU) output when the output frequency reaches the running
frequency can be adjusted between 0 and ±100% of the running frequency.
This parameter can be used to ensure that the running frequency has been reached or used as the operation
start signal etc. for related equipment.
Parameter Factory
Number Setting
41 10%

4.2.19 Output frequency detection (Pr. 42, Pr. 43, Pr. 50, Pr. 116)

Pr. 42 "output frequency detection"
Pr. 43 "output frequency detection for reverse rotation"
Pr. 50 "second output frequency detection"
Pr. 116 "third output frequency detection"
The output frequency signal (FU, FU2, FU3) is output when the output frequency reaches or exceeds
the setting. This function can be used for electromagnetic brake operation, open signal, etc.
! You can also set the detection of the frequency used exclusively for reverse rotation. This function is
effective for switching the timing of electromagnetic brake operation between forward rotation (rise) and
reverse rotation (fall) during vertical lift operation, etc.
Parameter Factory
Number Setting
42 6Hz
43 9999
50 30Hz
116 9999
Setting Range
0 to 100%
Running frequency
Output signal
SU
OFF ON
Setting Range Remarks
0 to 400Hz
9999: Same as Pr. 42
0 to 400Hz, 9999
0 to 400Hz
0 to 400Hz, 9999 9999: Function invalid
83
PARAMETERS
Related parameters
Pr. 190 "RUN terminal function
selection"
Pr. 191 "SU terminal function selection"
Pr. 192 "IPF terminal function selection"
Pr. 193 "OL terminal function selection"
Pr. 194 "FU terminal function selection"
Pr. 195 "A, B, C terminal function
selection"
Adjustable range Pr.41
Time
OFF
setting
4