Mitsubishi QJ71MB91 User Manual page 126

5
FUNCTIONS
5
- 11 5.2 Master Function
5.2.1 Automatic communication function
(b) Data transfer timing in the automatic communication buffer area
Data are transferred for each data exchange with the target station.
(c) Data transfer between the automatic communication function buffer areas and
programmable controller CPU device memory
Data can be transferred between the automatic communication buffer area and
programmable controller CPU device memory by either of the following methods.
Table5.3 Data transfer between automatic communication function buffer areas and
Transfer method
Transfer by auto refresh setting
Transfer using the sequence program
* 1 Refer to the following manual for details on the intelligent function module devices.
User's Manual (Function Explanation, Program Fundamentals) for the CPU module used
programmable controller CPU device memory
Make the auto refresh setting on GX Configurator-
MB.( Section 8.5)
Specify the intelligent function module device (Un\G
sequence program to make transfer.
Description
*1
) in a