TP-Link Auranet EAP110 User Manual page 68

Enable SNMP Agent and the SNMP Agent will collect the information of
SNMP Agent:
this device and respond to information requests from one or more
management systems.
SysContact: Enter the textual identification of the contact person for this managed
node.
SysName: Enter an administratively-assigned name for this managed node.
SysLocation: Enter the physical location of this managed node.
Get Community refers to a host group aiming at network management. Get
Community: Community only has the read-only right of the device's SNMP
information. The community name can be considered a group
password. The default setting is public.
Get Source: Defines the IP address (for example, 10.10.10.1) or subnet for
management systems that can serve as Get Community to read the
SNMP information of this device. The format of subnet is "IP address/bit"
(such as 10.10.10.0/24). The default is 0.0.0.0, which means all hosts can
read the SNMP information of this device.
Set Set Community has the read and write right of the device's SNMP
Community: information. Enter the community name that allows read/write access
to the device's SNMP information. The community name can be
considered a group password. The default setting is private.
Set Source: Defines the IP address (for example, 10.10.10.1) or subnet for
management systems that can serve as Set Community to read and
write the SNMP information of this device. The format of subnet is "IP
address/bit" (such as 10.10.10.0/24). The default is 0.0.0.0, which
means all hosts can read and write the SNMP information of this
device.
NOTE:
Defining community can allow management systems in the same community to
communicate with the SNMP Agent. The community name can be seen as the shared
password of the network hosts group. Thus, for the security, we suggest modifying the
default community name before enabling the SNMP Agent service. If the field of
community is blank, the SNMP Agent will not respond to any community name.
57