Advertisement
Table of Contents
- 1 Recommendation for Wall Installation
- 2 Panel Locations
- 3 Recommendation for Use with Castors
- 4 Electrical Connection
- 5 Using Your Heater for the First Time
- 6 The MR190 Digital Controller
- 7 Manual Heater Operation
- 8 Setting the Time
- 9 Programming the Timer
- 10 Resetting the Heater
- 11 Child Lock
- 12 Maintenance
- 13 Specifications
- Download this manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Noirot 7358-3T
Summary of Contents for Noirot 7358-3T
- Page 1 Noirot Spot Plus Digital Timer Electric Convection Panel Heater Operating & Installation Instructions In Order To Qualify For Your Lifetime Warranty Please Visit our Website and complete the Online Registration www.noirot.com.au...
- Page 2 Note: To centre your appliance laterally on the wall, use the hole marked 2. Fig. 1 Model Height 7358-3T 7358-5T 7358-7T 7358-8T The heater must not be located immediately below a socket outlet (as per requirement of Clause 7.12 of AS/NZS 60335.2.30).
- Page 3 AS/NZS 3000: 2000 (Wiring Rules). Although this heater is double insulated and does not require earthing, for use in the bathroom it must be located so that the controls cannot be touched by a person in the bath or shower. Fig. 3 www.noirot.com.au...
- Page 4 PLEASE NOTE: For safety reasons the Flexible Cord must not be modified or repaired in any way. If the Cord is damaged, it must be replaced by a Noirot appointed and approved service agent. If there are any concerns, contact Noirot Australia Pty Ltd on 1 300 664 768 before plugging it in.
- Page 5 3 seconds to enter the time setting mode The Hour will now be flashing Use the buttons to set the current hour, then press to confirm The Minutes will now be flashing. Use the buttons to set the current hour, then press to confirm www.noirot.com.au...
- Page 6 No Pr is displayed if no more heating periods are programmed for that day. Note: The temperature can be adjusted at any time during a heating period. Simply press the buttons to adjust the room temperature. www.noirot.com.au...
- Page 7 MAINTENANCE Your Noirot Electric Panel Heater requires very little maintenance. To remove surface dust use a soft cloth; to remove marks use a damp cloth. Never use abrasives or metal scourers which could damage the polyester coating. It is recommended to periodically clean the air vents using the soft brush on your vacuum cleaner, as dense accumulation of dust will cause the heater to over-heat and trigger the safety thermal cut-out switch.
- Page 8 Your Noirot Spot Plus electric panel heaters comes with a LIFETIME WARRANTY, therefore any replacement of faulty parts or repairs of any kind must be carried out by a qualified person and authorised by Noirot Australia Pty Ltd or their approved representative. Failure to do so will VOID the WARRANTY.
Need help?
Do you have a question about the 7358-3T and is the answer not in the manual?
Questions and answers