Removing the sensor board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the battery.
3
Remove the
wireless
4
Remove the
display
5
Remove the
display
Procedure
CAUTION: Place the display-panel assembly on a soft and clean surface to
avoid scratching the display.
1
Open the latch and disconnect the sensor-board cable from the sensor board.
computer. After working inside your computer, follow
After working inside your
cover.
card.
assembly.
panel.
computer. For more safety best
www.dell.com/
Before
79