Replacing The I/O Board; Procedure; Post-Requisites - Dell Inspiron 11 3000 Service Manual

Replacing the I/O board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Place the I/O board on the palmrest and keyboard assembly.
2 Align the screw holes on the I/O board with the screw holes on the palmrest and
keyboard assembly.
3 Replace the screws that secure the I/O board to the palmrest and keyboard
assembly.
4 Slide the power and volume-buttons board, sensor board and I/O-board cables
into their respective slots on the I/O board and press down on the latches to
secure the cables.

Post-requisites

1 Follow the procedure from step 3 to step 4 in
2 Replace the battery.
3 Replace the base
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
"Replacing the hard
Before
drive".
33