Replacing the coin-cell battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
With the positive-side facing up, place the coin-cell battery into the battery
socket on the system board.
2
Route the coin-cell battery cable through its routing guides on the right speaker.
3
Connect the coin-cell battery cable to the system board.
4
Turn the I/O-board cable over to cover the coin-cell battery.
5
Slide the I/O-board cable into its slot on the system board and press down the
latch to secure the cable.
Post-requisites
1
Replace the battery.
2
Replace the
base
42
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before