Replacing the wireless card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
CAUTION: To avoid damage to the wireless card, do not place any cables
under it.
1
Align the notch on the wireless card with the tab on the wireless-card slot on the
system board.
2
Insert the wireless card at an angle into the wireless-card slot.
3
Align the screw hole on the wireless card with the screw hole on the system
board.
4
Replace the screw that secures the wireless card to the system board.
5
Connect the antenna cables to the wireless card.
36
computer. After working inside your computer, follow
After working inside your
computer. For more safety best
www.dell.com/
Before