Table Of Contents; Applications And Features Of Hios Digital Torque Meters - HIOS HDP-50 Operation Manual

Contents
• Applications and features of
HIOS Digital Torque Meters ............................1
• Safety Precautions ............................................ 2
• HIOS Digital Torque Meter controls and
List of items.................................................... 3
• Functions............................................................4
• Operating procedure .........................................5
• Explanations of functions .............................. 6−8
DIP switch .......................................................6
Torque settings ...............................................6
Memory ..........................................................7
Average torque measurement ........................8
However high the quality of your screwdriver, you cannot make full use of its potential unless you know
the right amount of torque for each job and make sure that is the torque being delivered. This instrument
monitors tightening and loosening torque of screws. With an optional attachment, it is also possible to
transfer measurement data to a computer for use in integrated production management systems.
Easy to use, accurate and low in cost, HIOS digital torque meters are used by manufacturers of electronic
goods, cameras, watches and other kinds of precision instruments, as well as by makers of automobiles
and aircraft.
■ Applications
• Measurement of tightening and loosening torque
(torque increase and slack torque).
• Torque measurement of other kinds of rotation
tools (may require adapter)
Examples of uses of torque measurement data
Reference for preparation of tap screw coun-
•
terbore diameters
Sorting screws by required torque values
•
Classifying jars by screw cap tightness
•
Destructive testing of small parts
•
Quality control of plastic screw threads and
•
plastic parts
■ Features
• Up to 100 data measurements can be stored in
memory at a time.
• Checks maximum, minimum and average torque
measurements.
• Torque value display can be automatically reset
to zero.
• Torque value display are automatically recali-
brated.
• First peak mode (F.PEAK*) measurement
makes it possible to determine slip torque.
*This function may not be available due to fas-
tening condition.
Please inquire to HIOS for the condition.
• Battery charger...................................................8
• Types of data output...........................................9
• Customer service ...............................................9
• Inspection and calibration ..................................9
• Troubleshooting ...............................................10
• Specifications ...................................................10
• External features diagram ................................11
• Analog and serial data
output specifications .....................................11
• China RoHS2 Table ..........................................12
• Values are displayed digitally for ease and ac-
curacy in reading out data.
• The display captures torque peak measurements
until the reset button is pressed to assure accu-
racy of records.
• Can be set for rotation in either direction, for easy
measurement of both tightening and loosening
torque.
• Counterclockwise torque measurement is indi-
cated by a minus sign in front of displayed values.
• The strain meter is directly attached to the
torque sensor, as part of the instrument's simple,
rugged design.
• Can be integrated into a statistical process con-
trol system.
• Small, light and operated by rechargeable bat-
tery, this instrument is highly portable.
• Data can be output analogically, as waveforms
or numerical printouts, for a wide range of uses.
(Requires optional analog cord.)
• An input tool is available to make possible trans-
fer of measurement data to a computer. (See page
9 for details.)
• Comes with an AC adapter that can be used with
100 − 240 volt power sources. Runs on an envi-
ronment-friendly nickel-hydrogen battery.
- 1 -