2.14 Sound Troubleshooting
2.14 Sound Troubleshooting
This section describes how to determine if the computer's sound functions are functioning
properly. Perform the steps below starting with Procedure 1 and continuing with the other
procedures as required.
Procedure 1
Execute the Sound test in Sound Test program disk. Refer to Chapter 3, Tests and Diagnostics
for more information on how to perform the test program.
If any error is detected by the test, go to Procedure 2.
Procedure 2
The connection of sound system is shown in the following figure.
PORTEGE A600 Maintenance Manual (960-710)
Downloaded from
www.Manualslib.com
Procedure 1: Diagnostic Test Program Execution Check
Procedure 2: Connecor Check
Procedure 3: Replacement Check
Diagnostic Test Program Execution Check
Connector Check
manuals search engine
2 Troubleshooting Procedures
[CONFIDENTIAL]
2- 59