Bluetooth Troubleshooting - Toshiba PORTÉGÉ A600 Maintenance Manual

2 Troubleshooting Procedures

2.13 Bluetooth Troubleshooting

This section describes how to determine if the computer's Bluetooth is functioning properly.
Perform the steps below starting with Procedure 1 and continuing with the other procedures
as required.
Procedure 1
Make sure the wireless switch on the left side of the computer is turned "On". If it is not,
slide the switch toward the back of the computer to turn it on.
Check 1
Check 2
2-56
Downloaded from www.Manualslib.com
Procedure 1: Diagnostic Test Program Execution Check
Procedure 2: Connection Check
Procedure 3: Replacement Check
Diagnostic Test Program Execution Check
Execute Bluetooth test program. Perform the test following the instructions
described in Chapter 3, Bluetooth Test Program. You will need a second computer
that can communicate by the Bluetooth.
If the computer passes the test, the function is correctly working. If the computer
does not pass the test, go to check 2.
The Bluetooth module may be defective or damaged. Replace it with a new one.
Then perform the test program again.
If the computer still does not pass the test, go to Procedure 2.
[CONFIDENTIAL]
manuals search engine
2.13 Bluetooth Troubleshooting
PORTEGE A600 Maintenance Manual (960-710)