Toshiba PORTÉGÉ A600 Maintenance Manual page 255

4.12 Optical disk drive (DVD-Super Multi drive)/MDC modem
4.12 Optical disk drive (DVD-Super Multi drive)/MDC modem
Removing the Optical disk drive/MDC modem
To remove the optical disk drive/MDC modem, follow the steps below and refer to Figure 4-
12 to 4-16.
CAUTION: When the optical disk inside the optical disk drive can not be ejected
1. Disconnect the ODD FPC from the connector CN9400 on the system board.
2. Remove the following screw and optical disk drive from the slot.
PORTÉGÉ A600 Maintenance Manual (960-710)
Downloaded from www.Manualslib.com
because of some failure, open the disc tray by inserting a slender object
(about 15 mm) such as a straightened paper clip into the eject hole near the
eject button.
An optical disk drive or MDC modem (dummy ODD) is incorporated
exclusively.
• M2×6C
BIND
M2x6C BIND
Optical disk drive
Figure 4-12 Removing the optical disk drive (1)
manuals search engine
×1
[CONFIDENTIAL]
4 Replacement Procedures
CN9400
ODD FPC
4-27