Table of Contents
Advertisement
7A. Loosen Ball Knob Pop Pin (102) then mount Leg Hold Down (P) into
Attachment Holder (I) and Secure into position by tightening the Ball Knob
Pop Pin (102).
7B. Insert a Foam Roller Tube (Q) midway along its length into the upper
holes on the Leg Hold Down (P). Use Two Foam Roller (222 & 223) and slide
one on to each exposed side of the Foam Roller Tube (Q). Insert a Round
Cap (120) on to each side of Foam Roller Tube (Q) using:
2 - (120) Round Cap D25.4xD65x31.5
2 - (222 & 233) Foam Roller D23xD100x200L
7C. Insert a Foam Roller Tube (Q) midway along its length into the lower
holes on the Leg Hold Down (P). Use Two Foam Rollers (222 & 223) and
slide one on to each exposed side of the Foam Roller Tube (Q). Insert a
Round Cap (120) on to each side of Foam Roller Tube (Q) to keep the Foam
Rollers in place using:
2 - (120) Round Cap D25.4xD65x31.5
2 - (222 & 233) Foam Roller D23xD100x200L
STEP 7
24
Advertisement
Table of Contents
