Table of Contents
Advertisement
5A. Attach the Seat Pad (L) onto the Seat Plate (E) by using:
4 - (3) Hex Bolt M8x1.25x25L
4 - (54) Spring Washer D15.4xD8.2x2T
4 - (50) Flat Washer D18xD8.5x1.2T
Note: loosely install all the hardware by hand prior to tightening with tools. This
will make aligning the holes easier
Thoroughly tighten the hardware once complete
STEP 5
20
Advertisement
Table of Contents
