4A. Attach the Attachment Holder (I) to the front of Main Frame (A) and Fixing
Plate (J) to the rear of Main Frame (A) by using:
2 - (7) Hex Bolt M12x1.75x80L
2 - (76) Nylon Nut M12x1.75x12T
4 - (52) Flat Washer D24xD13.5x2.5T
Note: If you do not intend on using the Leg Hold Down, do not install the
Attachment Holder (I).
Thoroughly tighten the hardware once complete
STEP 4
18