7
Introduction
Safety and Regulatory Certifications
Physical Specifications
Acme Packet 4500
Chassis
Specifications
AC Power Supply
Physical
Dimensions
Acme Packet 4500 Hardware Installation and Maintenance Guide
This chapter provides information regarding the physical, electrical, environmental,
and connector specifications of the Acme Packet 4500.
For information regarding safety and regulatory certifications applicable to the Acme
Packet 4500, refer to the Acme Packet Platforms Safety and Compliance Guide in
addition to this document.
This table lists the physical dimensions and weight of the Acme Packet 4500.
Table 7 - 18. Chassis Physical Dimensions and Weight
Specification
Description
Height
1.72" (4.37 cm) (1U)
Width
17.10" (43.43 cm) (+ mounting ear width: 19" (48.26 cm))
Depth
19" (48.26 cm) (+ mounting slide bar depth)
Weight
approximately 19 lbs (8.62 kg), fully loaded
This table lists the physical dimensions and weight of the Acme Packet 4500 AC
power supply.
Table 7 - 19. AC Power Supply Physical Dimensions
Specification
Description
Height
1.594" (4.05 cm)
Width
4" (10.16 cm)
Depth
8.50" (21.59 cm)
Weight
2lbs., 2 oz. (0.96 kg)
Important: This equipment is intended for installation in locations where National
Electrical Code (NEC) applies.
Specifications
97