Special Options - Uhlenbrock Elektronik DAISY User Manual

5 Special Options

The DAISY Special Options can be edited using the DAISY
"Programming mode".
Special Description
Option
0 Software version number (cannot be edited!)
1 DAISY serial number (cannot be edited!)
9 0=turnout positions not saved (analog mode)
1=turnout positions saved (analog mode)
11 LED brightness while operating as a DAISY-System:
0 = maximum brightness
3 = minimum brightness
12 LED brightness while operating as an add-on throttle:
0 = maximum brightness
3 = minimum brightness
13 Dynamic effect (rotary encoder) for 28 and 31 speed steps
locomotives:
0 = off
15 = maximum dynamic effect
15 0= DAISY-System (digital) does not generate any Motorola signal
1= DAISY-System (digital) always generates a Motorola signal
16 0= DAISY-System (digital) does not generate any DCC signal
1= DAISY-System (digital) always generates a DCC signal
17 Dynamic effect (rotary encoder) for 128 speed steps locomotives:
0 = off
15 = maximum dynamic effect
23 Maximum 'on' time for accessory decoders:
0 = as long as the corresponding key is pressed
1-15 = 0.3 through 2.3 seconds in equal steps
All Special Options can be reset to the factory settings by keeping the
[Stop] key pressed while either turning on the DAISY-System or
plugging the DAISY throttle into LocoNet.
24
DAISY
Range Default
- -
- -
0-1 0
0-3 0
0-3 1
0-15 5
0-1 1
0-1 0
0-15 8
0-15 4