Programming Mode - Uhlenbrock Elektronik DAISY User Manual

This is how to proceed:
• While in turnout mode, press the [Turnout] key. The display indicates
the turnout address controlled by the [f1] key (i.e., the "base
address"), e.g.:
W
• Rotate the encoder in order to select the desired new "base address".
The base address can be edited in steps of 4 units. For example, a
single step (rotation) in the clockwise direction will indicate:
W
The highest possible value is 253.
• Press the [Turnout] key in order to confirm selection of the new "base
address". The display will now revert to indicate the speed of the
currently selected locomotive.

3.4 Programming mode

With a DAISY System in analog mode, the programming mode of a
DAISY throttle can only be used for changing configuration parameters
of the DAISY throttle itself.
This is how to proceed:
• Press the [Prog] key. The display indicates:
ProG
• Release the [Prog] key. The display indicates:
S
The remaining 3 digits show the number of the Special Option which
has been selected last.
• Rotate the encoder to select the desired Special Option number
• Press the [Prog] key to select that particular Special Option. The
display will indicate the current value of the selected Special Option.
• Rotate the encoder to select the desired Special Option value
TIP The value can be displayed in hexadecimal format by pressing the
[function] key. It will revert to decimal format as soon as that key is
released.
• Change the SO value by pressing the [Prog] key.
• You can leave programming mode at any time by pressing either the
[Locomotive] or the [Turnout] key
1
5
Special Options edit
22
DAISY