Uhlenbrock Elektronik DAISY User Manual page 13

• Rotate the encoder in order to select a different locomotive type, e.g.:
Mot2
• Confirm type editing by pressing the [Locomotive] key – or abort type
editing by pressing either the [Turnout] or [Prog] keys.
2.2.4 How to dispatch a locomotive address
It is possible to use a DAISY throttle in order to "pre-select" (dispatch) a
locomotive address for later control by a throttle which does not feature
any locomotive (address) selection capability (e.g., a FRED in dispatch
mode or a Profi-Control). Through this procedure, the desired
locomotive address can be saved in a so-called "dispatch memory",
from which a device can read it later.
This is how to proceed:
• Press and release the [Locomotive] key. The display will show the
currently selected locomotive address.
• Press the [Off] key and keep it pressed. The display indicates:
Disp
• Release the [Off] key. The locomotive address has been dispatched.
2.2.5 Connecting additional throttles to a DAISY-System (digital)
If FRED's or Profi-Control's are connected to a DAISY-System (in
digital mode), then one can use the function keys f1 through f4 (FRED)
or f1 through f8 (Profi-Control) in order to select a locomotive. The
locomotives which can be selected are those which have been
memorized in the first four memory positions of the DAISY-System.
That is:
Memory position
FRED
Profi-Control
13
1 2
f1 f2
f1 or f5 f2 or f6 f3 or f7
DAISY
3 4
f3 f4
f4 or f8