Uhlenbrock Elektronik DAISY User Manual page 12

• Press the [function] key again. The display shows the address of the
currently selected locomotive, e.g.:
7
• Press the [Locomotive] key to go back to drive mode.
The possible locomotive types are shown as:
Mot1
Motorola old
Mot2
Motorola new
d 14
DCC 14 speed steps
d 28
DCC 28 speed steps
d128
DCC 128 speed steps
-dc-
analog locomotive
(can only be selected through address 0)
How to edit the current format (type) of a locomotive
• Press the [Locomotive] key. The display indicates:
Loco
• Release the [Locomotive] key. The display will show the currently
selected locomotive address, e.g.:
7
• Rotate the encoder in order to select the memory position you wish to
either edit or erase.
• Press the [Locomotive] key and keep it pressed. The display shows:
Edit
• After about 2 seconds the locomotive address will begin to blink.
• Release the [Locomotive] key: both direction LEDs will be lit.
• Press the [function] key. The display shows the type of the currently
selected locomotive, e.g.:
Mot1
12
DAISY