Page 2
Etross-8848 GSM/PSTN FWT with LCR has the function to choose route automatically. When you dial out from your “Etross-8848 GSM/PSTN FWT”,it will check the prefix no. You preset into the device,then it will call out through GSM or PSTN according to the Presetting rules and GSM/PSTN both support call in.
GSM FWT-8848 User's Manual Version 1.1 Phone interface RJ11 2 RJ-11 ports Antenna interface SMA-female No.1: Power, No.2.in use, No.3, in talk, No.4, From left to right(front LED display Battery, if have, No. 5-7, Signal strength side view) LEDs display for Signal strength, Power, Working Front side Status,Talking and Battery indicator;...
Page 5
GSM FWT-8848 User's Manual Version 1.1 6,Installation Connection 6,Installation 6,Installation 6,Installation And And Connection Connection Connection Condition Condition Installation Installation The Condition Condition for for Installation Installation The terminal asks for 110- 220V AV power supply. It must be installed in the area where the GSM network can cover.
Page 6
GSM FWT-8848 User's Manual Version 1.1 3) 3) 3) 3) The The installation installation installation installation for for connecting connecting connecting connecting to to to to PBX PBX for for call call call call extentions extentions extentions extentions If users want to connect small PBX to this terminal, connect terminal’s “Phone port” to the PBX.
Page 7
*#01#30# , 01--command,30--time,Max 9.9 seconds,Min 0.5 seconds, default setting is 3 seconds. *If you use GSM FWT-8848 for connecting to VoIP gateway, you can set dial interval as 0.5 second, it can make PDD<5 sec (Method: *#01#05#);...
Page 8
GSM FWT-8848 User's Manual Version 1.1 *If you use GSM FWT-8848 for connecting telephone, PBX, billing device, you can set dial interval as 3 seconds or 5 seconds as you like (Method: *#01#30#, set the dial interval as 3 seconds).
Page 9
GSM FWT-8848 User's Manual Version 1.1 17-order, 00-value, 00-DTMF, 01-FSK, default setting is 00 This setting need terminal has FSK Chip set support Setting Setting DTMF DTMF Caller Caller Caller ID ID ID ID Format Format Format 12) Setting Setting DTMF...
Page 10
GSM FWT-8848 User's Manual Version 1.1 16) Pin Pin Lock Lock Lock Lock &Network &Network &Network &Network Lock Lock Lock Lock Setting Setting Setting Setting (optional)(Should (optional)(Should (optional)(Should (optional)(Should confirm confirm confirm confirm before before before before order) order) order)
Page 11
GSM FWT-8848 User's Manual Version 1.1 2,Set 2,Set 2,Set to to to to close close close Network Network lock lock function function 2,Set close Network Network lock lock function function *#11#01234# *#11#01234# *#11#01234# *#11#01234# 11-command,01234-password 3,Set 3,Set Network Network codes...
Page 12
GSM FWT-8848 User's Manual Version 1.1 Warranty Card Warranty Card Warranty Warranty Card Card Please fill in the blanks carefully, and keep it properly as the voucher for warranty. Type of Equipment GSM FWT-8848 User’s name Contact with: Contact Tel.no.
Page 13
GSM FWT-8848 User's Manual Version 1.1 Sales Agent Purchasing Date (Stamp)
Need help?
Do you have a question about the FWT-8848 and is the answer not in the manual?
Questions and answers