Sony NW-ZX100 Help Manual page 230

Help Guide
How to Use
Digital Music Player
NW-ZX100/ZX100HN
Making a Bluetooth connection using the NFC function
Simply touch your Walkman to a Bluetooth audio device that has the NFC function to automatically turn on the power of
the Bluetooth audio device, pair the Walkman and the Bluetooth audio device, and make a Bluetooth connection.
1. If the Bluetooth audio device has an NFC switch, set the NFC switch to on.
2. Touch your Walkman to the Bluetooth audio device.
Touch the mark of your Walkman (
instructions appear on the screen of the Walkman.
3. Follow the on-screen instructions to complete the connection.
Hint
Touch the devices together again to disconnect.
Take the following measures if the connection is poor.
Slowly move your Walkman over the mark of the Bluetooth audio device (
If your Walkman is in a case, remove the case.
From the Home menu, select
Note
One-touch connections (NFC) cannot be made while the HOLD function of your Walkman is enabled. Release the
HOLD function before touching the devices together to make a one-touch connection.
One-touch connections (NFC) cannot be made while your Walkman is in standby mode and the screen is off. Turn
the screen on before touching the devices together to make a one-touch connection.
) to the mark of the Bluetooth audio device (
[Settings] - [Common Settings] - [NFC Settings] - [On].
). Hold together until
).
219