Sony NW-ZX100 Help Manual page 117

4. WM-PORT jack
Connect the USB cable (supplied) or other accessories that support WM-PORT (not supplied).
5. Strap hole
Use to attach a strap (not supplied).
6. Display
7. VOL (Volume) +/– button
Press to adjust the volume.
There is a tactile dot on the + button to help you operate the buttons without looking.
8. HOLD switch
Set the HOLD switch to protect your Walkman against accidental operation during transportation.
Slide the HOLD switch in the direction of the arrow (
the opposite position to release the HOLD function.
9. OPTION/PWR OFF (Option/Power off) button
Press to display the option menu.
Press and hold to turn the screen off and enter standby mode.
10. Access lamp (under the microSD card slot cover)
11. microSD card slot (under the microSD card slot cover)
Open the cover before inserting a microSD card. Insert a microSD card until it clicks into place to increase the
available memory of your Walkman.
12. RESTART button (under the microSD card slot cover)
Press the RESTART button with a small pin, etc. to restart your Walkman.
13. microSD card slot cover
14. N-mark
Touch a Bluetooth audio device equipped with the NFC function to this mark to connect it to your Walkman.
15. Built-in Bluetooth antenna
Do not cover the antenna part with your hands or other object when a Bluetooth connection is active. Doing so may
interrupt the connection.
(*1)
Sound is not emitted from the wired headphones while your Walkman is connected to a device via a Bluetooth connection.
Disconnect the Bluetooth connection to use wired headphones.
Related Topic
Turning the power on
Turning the power off
Home menu
How to use the Home menu
How to use the option menu
Using the HOLD switch
) to disable all operation buttons. Slide the HOLD switch to
106