Page 2
INSTEON Starter Kit Status LED Idle / Linking Unlinking Factory Reset Power Ethernet Port Ethernet Power Cable Cable...
Page 3
Setup Your Kit Connect the Hub to power and your internet router using only the cables provided. Avoid power strips and switched outlets...
Page 4
Download and install the latest INSTEON for Hub App from your device’s app store. insteon for hub INSTEON for Hub Scan the QR Code and tap your store.
Page 5
Connect to the same network as the INSTEON Hub and launch the App. Create a new account. INSTEON Sign In Create an Account...
Add Devices Follow the on-screen instructions to add your devices. For additional documentation, visit: insteon.com/support...
Page 7
On/Off Module Status LED Set Button Up to 1,800W/15A maximum load Learn more about On/Off Module insteon.com/onoffmodule-qsg...
Page 8
Open/Close Sensor Set Button Status LED Magnet AA Battery (Included) (Cover Removed) Learn more about Open/Close Sensor insteon.com/openclosesensor-qsg...
Motion Sensor Status LED ® Wall Mount Retention Slot Settings Set Button Jumpers 9V Battery (Included) (Cover Removed) Learn more about Motion Sensor insteon.com/motionsensor-qsg...
Leak Sensor Set Button Status LED Water Contacts (Metal) AA Battery (Included) (Cover Removed) Learn more about Leak Sensor insteon.com/leaksensor-qsg...
Remote Access You can monitor and control your devices when away if you setup Remote Access. We’re here to help. Contact INSTEON Support at 866.243.8022.
Need help?
Do you have a question about the Assurance Kit and is the answer not in the manual?
Questions and answers