INSTEON Hub Status LED Idle / Linking Unlinking Factory Reset Power Ethernet Port Ethernet Power Cable Cable...
Page 3
Setup Your Kit Connect the Hub to power and your internet router using only the cables provided. Avoid power strips and switched outlets...
Page 4
Download and install the latest INSTEON for Hub App from your device’s app store. insteon for hub INSTEON for Hub Scan the QR Code and tap your store.
Page 5
Connect to the same network as the INSTEON Hub and launch the App. Create a new account. INSTEON Sign In Create an Account For additional documentation, visit: insteon.com/support...
Page 7
Dimmer Module Status LED Brighten Set Button ® Up to 300W maximum load Learn more about Dimmer Module insteon.com/dimmermodule-qsg...
Page 8
Open/Close Sensor Set Button Status LED Magnet AA Battery (Included) (Cover Removed) Learn more about Open/Close Sensor insteon.com/openclosesensor-qsg...
Motion Sensor Status LED ® Wall Mount Retention Slot Settings Set Button Jumpers 9V Battery (Included) (Cover Removed) Learn more about Motion Sensor insteon.com/motionsensor-qsg...
Leak Sensor Set Button Status LED Water Contacts (Metal) AA Battery (Included) (Cover Removed) Learn more about Leak Sensor insteon.com/leaksensor-qsg...
Page 11
Thermostat Temperature Adjust Mode Status LED Set Button Learn more about Thermostat insteon.com/thermostat-qsg...
WiFi Camera Day/Night Sensor Speaker Night Vision LEDs Microphone Ethernet Power DC5V2A AUDIO Audio Antenna Learn more about WiFi Camera insteon.com/wificamera-qsg...
Need help?
Do you have a question about the Connected Kit and is the answer not in the manual?
Questions and answers