Whirlpool W10856086A Use & Care Manual page 11

8.
Select options, if desired
Dosing Aid (Detergent Button):
The Detergent Button calculates a recommended amount
of detergent in milliliters. This will be displayed after touching
the Start/Pause button and the load is detected. This Dosing
Aid also lets you adapt your washer to the dosing amounts
of your detergent and the hardness of your local water.
To set the washer for the detergent dosing amount:
1. Check your detergent dosing amount for medium soil level
and medium water hardness.
NOTE: Do not add more than the dose recommended by the
detergent manufacturer.
2. Touch and hold the Dosing Aid button
until the bottle symbol
lights up.
3. Turn the knob to adjust the dosing value to the one shown
on the detergent bottle. Press the knob to confirm your
selection. See the chart in "About Detergent Concentration."
Wool
Quick Wash
Handwash
Rinse & Spin
Spin
To set the washer for local water hardness (washer is
preset for soft water):
1. Check your regional water hardness level by consulting
your local authorities or the internet.
2. If your water is not soft, touch and hold the Program and
Dosing Aid buttons at the same time. "1" (for soft water)
appears on the display.
P
Program
3. Turn the knob to adjust the water level to either "2"
(Medium) or "3" (Hard). Press the knob to confirm your
selection.
Wool
Quick Wash
Handwash
Rinse & Spin
Spin
†
on the display
Detergent
3 Sec
X-hot
Hot
Warm
Cool
Cold
Colors
Detergent
3 Sec
X-hot
Hot
Warm
Cool
Cold
Colors
9.
Setting a delayed wash, if desired
If you do not want to begin a cycle immediately, you may
choose the Delay Wash option. This will delay the start
of the wash cycle by up to 24 hours.
To set a Delayed Wash:
1. Touch the Delay Wash button to set the desired delay time.
2. Turn the knob to the number of hours you want to delay
the start of the wash cycle. The delay time will appear
on the display. Press the knob to confirm your selection.
After touching the Start/Pause button, the door will lock
and the time will count down until the delay time has been
reached. The washer will start and the display will show the
remaining time in the cycle.
ml
10.
Change temperature or spin speed,
Max
if desired
High
Med
Low
O
Rinse
Hold
Touch the Temp or Spin Speed button; then turn the knob to
select the desired temperature or spin speed. As you turn the
knob, an indicator light will light up next to the temperatures
or spin speeds to the right of the knob. Stop turning when
the indicator next to the desired selection lights up. Press
the knob to confirm your selection.
ml
Max
High
Med
Low
O
Not all options and settings are available with all program/cycles.
†
Rinse
Hold
See "Program/Cycle Guide" for available options and settings.
Delay
Wash
ml
X-hot Max
Hot High
Warm Med
Cool Low
Cold O
Colors Rinse
Hold
†
Temp Spin
Speed
ml
X-hot Max
Hot High
Warm Med
Cool Low
Cold O
Colors Rinse
Hold
†
11